Home

Pure electric cleaning vehicle THD5182TXSEV1

Commodity name： Pure electric cleaning vehicle THD5182TXSEV1

Category:

Service Hotline:

Pure Electric Cleaning and Sweeping Vehicle

New generation pure electric cleaning and sweeping vehicle, suitable for mechanized cleaning, sweeping, and dust suppression spraying operations on city roads, squares, docks, tunnels, bridges, curbs, and curbstone facades.

Performance Highlights

Energy Saver: Adopts a "high-speed direct-drive stepless speed regulation silent fan", high efficiency, large air volume, maximum air volume up to 21500m³/h, 3 hours of charging, 2 days of operation, eliminating range anxiety.
Silent King: Adopts noise reduction patent technologies such as "dual-channel parallel air inlet and outlet noise reduction system" and "fully enclosed power compartment", reducing noise by 6-8 decibels.
Performance King: 9m³ capacity. The tank capacity is among the top in the industry, with the longest single-tank clean water spraying operation time.
Ergonomic driving layout + new high-resolution touch screen, enhancing driving experience.
Vector control technology ensures precise and consistent speed of dual fan motors, efficient and quiet operation is convenient.
Effortless Driving

Effortless Driving

Dual-source steering wheel steering, double protection for vehicle steering.

"Touch screen + controller + CAN bus control panel" one-button control.

Onboard rearview system provides cleaning effect monitoring and reversing image prompts.

Multiple safety protection configurations: automatic protection device, voice alarm system,

lighting system, trash can safety support rod, etc.

3-20km/h operating speed meets the cleaning requirements of different road conditions.

Accessories use well-known domestic and international brands.

Dual charging ports reduce charging time.

High-efficiency suction nozzle, meets the operational needs of different working conditions

New high-resolution touch screen, used for various vehicle

Excellent Efficiency

Full sweep, left sweep, right sweep, full wash and sweep, left wash and sweep, right wash and sweep, full wash,
Left wash, right wash 9 operation modes.
The road cleaning rate of the washing and sweeping operation can reach 98%, and the sweeping disc and spray rod have automatic obstacle avoidance and automatic reset functions.
The trash can has a self-cleaning device, and the tank is lifted and unloaded.
Innovative design combination suction nozzle suction width up to 2350mm.
Combination high-pressure cleaning spray rod, cleaning width over 3.2m.

Collision avoidance sweeping device can clean the road surface and wash the curbstone facade.

Rear spray dilution of air, spray dust suppression

Green Power Distribution

The chassis uses a Jiefang chassis, dual-gun DC charging, and a six-in-one controller.
Motor + gearbox drive, good climbing performance.
CATL high energy density lithium iron phosphate power battery liquid-cooled battery.
CRRC Times Electric Permanent Magnet Synchronous Motor.
Multi-in-one controller, lightweight, low failure rate.
Battery storage capacity 282kWh.

Main Technical Parameters

Project	Unit	THD5182TXSEV1 Parameter Value
Maximum Gross Weight	kg	18000
External Dimensions (Length × Width × Height)	mm	8945×（2545，2510，2500）×3320
Maximum Cleaning and Sweeping Width (excluding curb cleaning width)	m	3.5
Sweeping Speed	km/h	3-20
Maximum Sweeping Capacity	㎡/h	70000
Clean Water Tank Capacity	m³	8
Trash Can Capacity	m³	7
Dumping Angle	°	≥55
Chassis Brand	-	Jiefang
Battery Type	-	Lithium iron phosphate battery (original CATL)
Total Storage Capacity	kWh	282
Sweeping Rate	-	≥98%
Maximum Inhaled Particles	mm	≥100
Payload	kg	≥3200
Operating Temperature	℃	-30℃～+55℃ (dry sweeping mode); 0℃～+45℃ (washing and sweeping mode)

Product Configuration Table

Project			Parameter	Remarks
Chassis	Chassis Model, Category, Manufacturer		CA1180P62L3BEV/Category II/FAW Car Co., Ltd.
	Engine Model, Manufacturer		TZ366XS50EA/CRRC Times Electric Vehicle Co., Ltd.
	Rated Engine Power		180kw
	Wheelbase		5300mm
	Battery		Backrest
Upper structure motor	Fan motor model/power Model, Manufacturer		TZ230XS-80DC
	Oil pump motor model/power		180ST-M26320
Fan	Type		Special high-pressure centrifugal fan
	Rated speed		2600r/min
	Transmission type		5V narrow V-belt drive
Hydraulic system	Type		Open, electro-hydraulic control centralized operation
	Main components		Cycloid motor (Zhenjiang Dali), hydraulic cylinder, solenoid valve (Yuci Youyan), hydraulic check valve, counterbalance valve, overflow valve, throttle valve, integrated circuit, etc.
	Overflow pressure		15MPa
	Hydraulic oil capacity		60L
Electrical system	Control method		The cab uses a "display screen + controller + CAN bus operation panel" one-button operation control method, with a manual operation box on the rear right side of the vehicle, voice alarm, and electromechanical hydraulic interlock.
	Chassis system voltage		24V
	Working device system voltage		24V
	Battery model		With chassis
High-pressure cleaning system	High-pressure water pump	Type	Plunger type
		Model	Italian Prandsoli KT40
		Rated pressure	10Mpa
		System operating pressure	8MPa
		Rated flow rate	142L/min
		Rated speed	1450r/min
	Water valve and control	Water valve type	High-pressure stainless steel ball valve
		Control method	Cylinder driven, electric control
	Spray nozzle type		High-pressure washing type
Sweeping dust removal system			Electric water pump (157024), water spray nozzle, solenoid shut-off valve, sharing water filter and water tank with the high-pressure cleaning system
Sweeping system	Type		A liftable and extendible vertical sweeping disc is arranged on each side of the frame between the front and rear axles of the chassis. The rotation of the sweeping disc is driven by a hydraulic motor, and the speed is adjustable.
	Sweeping brush diameter		φ 900mm
	Sweeping disc speed		Three gears: 60/80/100
	Sweeping disc angle adjustment		Forward inclination 4°～6°, outward inclination 2°～4°
Suction nozzle	Type		Double-suction wide suction nozzle, with a built-in long row spray bar with high-pressure nozzles, the suction nozzle body moves with the road surface; hydraulic drive, electric automatic control of suction nozzle lifting, spring floating suspension
	Suction pipe diameter		2×φ180mm
	Ground clearance of rigid parts during operation		5～10mm
Left and right spray bars	Spray bar swing		Cylinder driven, electric automatic control, swing angle: 78°
	Nozzle ground clearance		Moves with the road surface via the suction nozzle wheel; ground clearance: 280mm
	Total number of nozzles		10, 5 on each side
Body part	Dustbin		Dustbin effective volume: 7m3, using 304 stainless steel material welding, material nominal wall thickness 4mm, actual measured thickness ≥3.75mm,
	Water tank		The water tank consists of two parts, the part shared with the dustbin is welded with 304 stainless steel material, the material nominal wall thickness is 4mm, the actual measured thickness is ≥3.75mm, the separate water tank uses Q355B welding, after electrophoresis, the inside uses a special Aksu paint anti-corrosion process to ensure that the vehicle does not rust through during its entire service life.

Key words:

Get Quote

Note: Please leave your contact information and our professionals will contact you as soon as possible!

Submit immediately